IES-1000 User’s Guide
Getting Started Screens 10-21
Table 10-17 Edit 802.1x Setup
LABEL DESCRIPTION
Reauthentication Select (On) if a subscriber has to periodically re-enter his or her username and password to
stay connected to the port.
Reauthentication
Timer
Specify how often (60~65535 seconds) a subscriber has to re-enter his or her username and
password to stay connected to the port.
Apply Click Apply to save your changes back to the IES-1000's volatile memory. The IES-1000
loses these changes if it is turned off or loses power, so use the Config Save link on the
navigation panel to the left to save your changes to the non-volatile memory when you are
done configuring.
Reset Click Reset to begin configuring this screen afresh.
10.5.14 Fast Mode VLAN ID Setup Screen
Click Fast Mode VLAN ID in the Bridge Setup screen to open this screen.
Figure 10-21 Bridge Fast Mode VLAN ID Setup
The following table describes this screen.
Table 10-18 Bridge Fast Mode VLAN ID Setup
LABEL DESCRIPTION
Bridge Setup Click this link to go to the Bridge Setup screen.
