IES-1000 User’s Guide
Commands Introduction 22-7
Table 22-1 Commands
MODULE COMMAND DESCRIPTION
Shows the controlled resources in the
specified process.
Shows the value of the specified
resource in a process.
<process> <resource> <value>
Sets the value of a process’s resource.
version
Shows the configuration driver’s
version information.
dhcprelay
add <ip>
Adds a DHCP server to the relay's list.
config
Displays the list of DHCP servers to
relay between.
delete [<ip> | all]
Deletes a DHCP server or all servers
from the relay's list.
enable
Turns on DHCP relay.
disable
Turns off DHCP relay.
help
Displays help on available commands.
reset
Resets and restarts DHCP relay.
pool
Shows the DHCP relay memory pool
status.
status
Shows whether or not DHCP relay is
activated.
trace
Activates trace option(s).
untrace
Deactivates trace option(s)
version
Displays the DHCP software version.
relayinfo enable
Turns on the DHCP relay agent
information (Option 82) feature.
disable
Turns off the DHCP relay agent
information (Option 82) feature.
status
Displays the current status of the
DHCP relay agent information (Option
82) feature.
add [<info>]
Adds the specified information for the
relay agent.
dot1x
enable
Turns on 802.1X security.
disable
Turns off 802.1X security.
status
Displays the 802.1X security status.
debug [level]
Turns the debug level on or off.
Enables 802.1X security on the
specified port.
