A SERVICE OF

logo

Open as PDF
next previous
IES-1000 User’s Guide
10/100M Fast Ethernet Port Commands 27-1
The Ethernet subsystem allows you to configure and monitor the 10/100M fast Ethernet port.
27.1 10/100M Fast Ethernet Overview
Refer to the web configurator chapter on the ADSL module ports for background information on the 10/100M
auto-sensing Ethernet ports.
27.2 Ethernet Commands
Use these commands to configure a network module’s Ethernet port.
27.2.1 Set Auto Command
Syntax:
192.168.1.1 ethernet> set auto <on|off>
where
<on|off> = on or off
This command sets the auto-negotiation of the Ethernet port to either on or off.
27.2.2 Set Duplex Command
Syntax:
192.168.1.1 ethernet> set duplex <mode>
where
<mode> = full or half
This command sets the duplex mode used when auto-negotiation is turned off.
27.2.3 Set Speed Command
Syntax:
192.168.1.1 ethernet> set speed <speed>
where
Chapter 27
10/100M
Fast Ethernet Port Commands