IES-1000 User’s Guide
31-8 IEEE 802.1QTagged VLAN Commands
31.3.7 SVLAN Getentry Command
Syntax:
192.168.1.1 vlan1q> svlan getentry <vid>
where
<vid> =
A VLAN ID. Valid parameter range = [1 – 4094].
This command displays an entry with a specified VLAN ID in the static VLAN table.
Display a Static VLAN Table Entry Example
The following figure is an example display of the following command.
192.168.1.1 vlan1q> svlan getentry 2
Figure 31-5 Example: Svlan Getentry 2 Command Display
31.3.8 SVLAN Delentry Command
Syntax:
192.168.1.1 vlan mgr> svlan delentry <vid>
where
<vid> =
A VLAN ID. Valid parameter range = [1 – 4094].
This command deletes an entry with a specified VLAN ID in the static VLAN table
Delete a Static VLAN Entry Example
The following example will delete the entry with VLAN ID 2 in the static VLAN table.
192.168.1.1 vlan mgr> svlan delentry 2
31.3.9 DVLAN List Command
Syntax:
192.168.1.1 vlan1q> dvlan list
This command displays the dynamic VLAN registration table. The following figure is an example of what is
displayed when you use this command.
vid port# ad_control tag_control
-------- ------- ------------ ------------
2 1 normal untag
2 fixed untag
3 normal untag
