IES-1000 User’s Guide
Commands Introduction 22-13
Table 22-1 Commands
MODULE COMMAND DESCRIPTION
bondc <bond name> <port list>
or
bondc <mode> <bond name>
<group list>
Bonds the specified member list and
sets them to STU-C mode.
bondr <bond name> <port list>
or
bondr <mode> <bond name>
<group list>
Bonds the specified member list and
sets them to STU-R mode.
nwirec <mode> <group name>
<group#>
Bundles the specified ports into an n-
wire group set to STU-C mode.
nwirer <mode> <group name>
<group#>
Bundles the specified ports into an n-
wire group set to STU-R mode.
pvc <portNo> <muxMode> <txvpi>
<txvci> [<rxvpi> <rxvci>]
Sets the PVC configuration to the
specified GSHDSL port.
pvcs <muxMode> <txvpi> <txvci>
[<rxvpi> <rxvci>]
Sets the PVC configuration to all
GSHDSL ports.
vcp <profile name> <encap>
<aal> <class> <pcr> <cdvt>
[<scr/mcr> <bt/nrm>]
Creates a VC profile.
Deletes the specified profile.
profiles
Deletes all profiles except the DEFVAL
profile.
bond <bond name>
Deletes the specified bonding group.
nwire <group name>
Deletes the specified n-wire group.
Deletes the specified PVC channel.
chs [<start port> [<stop
port>]]
Deletes all PVC channels for the
specified ports.
Deletes a specific VC profile.
vcps
Deletes all VC profiles except the
DEFVAL profile.
Shows the contents of the specified
profile.
profiles
Shows the contents of all profiles.
Shows the PVC configuration of the
specified GSHDSL ports.
pvcs
Shows the PVC configuration of all
GSHDSL ports.
Shows the contents of the specified
PVC channel.
