A SERVICE OF

logo

IES-1000 User’s Guide
Hardware Overview 3-1
This chapter gives a brief introduction to the IES-1000 hardware.
3.1 Additional Installation Requirements
A computer with Ethernet 10Base-T or 100Base-TX NIC (Network Interface Card)
WAN service provided by a local phone company
A computer with terminal emulation software configured to the following parameters:
VT100 terminal emulation
9600 bps
No parity, 8 data bits, 1 stop bit
No flow control
3.2 AC Power Front Panel
The following figure shows the front panel of the AC power version of the IES-1000 with a SAM1008 network
module installed on the left and an AAM1008 network module on the right.
Figure 3-1 AC Power Front Panel
3.3 DC Power Front Panel
The following figure shows the front panel of the DC power version of the IES-1000 with a SAM1008 network
module installed on the left and an AAM1008 network module on the right.
Figure 3-2 DC Power Front Panel
Chapter 3
Hardware
Overview