IES-1000 User’s Guide
25-6 G.SHDSL Commands
<Cmin> =
The minimum transmission rate in Kbps. This setting is optional. 192 Kbps is
the default if you do not configure a value for this parameter. Setting Cmax
and Cmin to the same rate fixes the rate for that port.
annexA | annexB =
The Power Spectral Density region, omitted for annexB.
Configure <Cmax> and <Cmin> parameters between 192 and 2304 Kbps.
Speed Configuration
Even though you can specify arbitrary numbers for port speeds using the set profile command, the
SAM1008 port speed is always adjusted to be a multiple of 32 Kbps. See 25.2 Configured Versus Actual Speed
and the examples shown next.
Speed Configuration Example 1:
The configuration
192.168.1.1 gshdsl> set profile economy 2000 200
sets the speed for the economy profile between 1984 and 192 Kbps.
Speed Configuration Example 2:
This example sets the speed of the economy profile at 768 Kbps.
192.168.1.1 gshdsl> set profile economy 800 800
25.3.11 Delete Profile Command
Syntax:
192.168.1.1 gshdsl> delete profile <name>
where
<name> = The profile name.
The delete profile command allows you to delete an individual profile by its name.
25.3.12 List Profiles Command
Syntax:
192.168.1.1 gshdsl> list profiles
The list profiles command displays all of the configured G.SHDSL profiles and which G.SHDSL ports are
assigned to each.
