Item Sub-item Sub-item Values Description
ECONOMODE OFF*
ON
EconoMode is a feature that allows the
product to use less toner per page.
Selecting this option extends the life of the
toner supply and might reduce the cost
per page. However, it also reduces print
quality. The printed page is adequate for
printing drafts.
HP does not recommend full-time use of
EconoMode. If EconoMode is used full-
time, the toner supply might outlast the
mechanical parts in the print cartridge. If
print quality begins to degrade under
these circumstances, you will need to
install a new print cartridge, even if there
is toner supply remaining in the cartridge.
TONER DENSITY 1 to 5 Lighten or darken the print on the page.
The lightest setting is 1, and the darkest
setting is 5. The default setting of 3 usually
produces the best results.
AUTO CLEANING OFF*
ON
When auto-cleaning is on, the product
prints a cleaning page when the page
count reaches the CLEANING
INTERVAL setting.
CLEANING
INTERVAL
500*
1000
2000
5000
10000
20000
When AUTO CLEANING is on, this
option specifies the number of pages that
are printed before a cleaning page is
automatically printed.
AUTO CLEANING
SIZE
LETTER*
A4
When AUTO CLEANING is on, this
option specifies the paper size that is
used to print the cleaning page.
CREATE
CLEANING PAGE
Prints a page of instructions for cleaning
excess toner off the pressure roller in the
fuser.
NOTE: Only available for non-duplex
products.
PROCESS
CLEANING PAGE
Create and process a cleaning page for
cleaning the pressure roller in the fuser.
When the cleaning process runs, a
cleaning page is printed. This page can be
discarded.
182 Chapter 3 Solve problems ENWW
