Resets menu
Use the RESETS menu to reset factory settings, disable and enable sleep mode, and update the product
after new supplies are installed.
To display: Press the Menu button
, select the CONFIGURE DEVICE menu, and then select the
RESETS menu.
NOTE: Values that have an asterisk (*) are the factory-default values. Some menu items have no
default.
Item Sub-item Values Description
RESTORE FACTORY
SETTINGS
Clear the page buffer, remove all
perishable personality data,
reset the printing environment,
and return all default settings to
factory defaults.
SLEEP MODE OFF
ON*
Select whether the product can
enter sleep mode. If you turn this
setting off, you cannot change
any settings in the SLEEP
DELAY menu.
Diagnostics menu
Use the DIAGNOSTICS menu to run tests that can help you identify and solve problems with the product.
To display: Press the Menu button
, and then select the DIAGNOSTICS menu.
NOTE: Values that have an asterisk (*) are the factory-default values. Some menu items have no
default.
Item Sub-item Values Description
PRINT EVENT LOG Prints a report containing the last
50 entries in the product’s event
log, starting with the most recent.
SHOW EVENT LOG Displays the last 50 events; the
most recent event is listed first.
PAPER PATH SENSORS Performs a test on each of the
product’s sensors to determine if
they are working correctly and
displays the status of each sensor.
PAPER PATH TEST Tests the paper-handling features
of the product, such as the
configuration of the trays.
PRINT TEST PAGE Generates a page for testing the
paper-handling features. You must
define the path for the test to test
specific paper paths.
194 Chapter 3 Solve problems ENWW
