Control panel message Description Recommended action
EIO DEVICE FAILURE
To clear press OK
The specified device has failed. Press the OK button to continue.
EIO FILE OPERATION FAILED
To clear press OK
A command attempted an illogical operation. Press the OK button to continue.
EIO FILE SYSTEM IS FULL
To clear press OK
The specified file system is full and cannot be
written to.
Press the OK button to continue.
EIO IS WRITE PROTECTED
To clear press OK
The file system cannot be written to. Press the OK button to continue.
Event log empty You are attempting to view an empty event
log by selecting the SHOW EVENT LOG
option from the control panel.
No action is necessary.
INCOMPATIBLE BLACK CARTRIDGE The print cartridge is for another product. Replace the print cartridge with a print
cartridge for this product.
Incorrect The wrong PIN number was entered. Reenter PIN number.
INFLATE FAILURE
SEND RFU UPGRADE ON USB DEV PORT
An error occurred during a firmware upgrade. Resend the firmware upgrade.
Initializing Individual tasks are being initialized. No action is necessary.
INSERT OR CLOSE TRAY <X>
For help press
The specified tray is open or missing. Insert or close the tray for printing to continue.
INSTALL BLACK CARTRIDGE
For help press
The print cartridge is missing. 1. Open the cartridge door.
2. Install the cartridge.
3. Close the cartridge door.
INSUFFICIENT MEMORY TO LOAD
FONTS/DATA
For help press
alternates with
<DEVICE>
To continue press OK
The product received more data than can fit
in its available memory. You might have tried
to transfer too many macros, soft fonts, or
complex graphics.
Press the OK button to print the transferred
data (some data might be lost).
Simplify the print job or install additional
memory.
LOAD TRAY 1 [TYPE] [SIZE]
To continue press OK
alternates with
LOAD TRAY 1 [TYPE] [SIZE]
For help press
Tray 1 is empty. Load Tray 1 with the requested paper.
If the paper is already in the Tray 1, press the
help button
, and then press the OK button
to print.
To use another tray, remove paper from
Tray 1, and then press the OK button to
continue.
Table 3-7 Control-panel messages (continued)
ENWW Tools for troubleshooting 209
