Control panel message Description Recommended action
Wait for printer to reinitialize This message can appear for a variety of
reasons:
●
The RAM DISK settings changed before
the product restarted.
●
The product is restarting after changing
external product modes.
●
You have exited the DIAGNOSTICS
menu.
●
A new formatter has been installed with
an old product, or a new product has
been installed with an old formatter.
No action is necessary.
WARMING UP
alternates with
<Current status message>
The product is coming out of sleep mode.
Printing continues when it is done.
No action is necessary.
Event-log messages
Print an event log
1. Press the Menu button .
2. Press the down arrow
button or the up arrow button to navigate to the DIAGNOSTICS menu,
and then press the OK button.
3. Press the down arrow
button or the up arrow button to navigate to the PRINT EVENT LOG
menu, and then press the OK button to print.
Show an event log
1. Press the Menu button .
2. Press the down arrow
button or the up arrow button to navigate to the DIAGNOSTICS menu,
and then press the OK button.
3. Press the down arrow
button or the up arrow button to navigate to the SHOW EVENT LOG
sub menu, and then press the OK button to print.
Table 3-7 Control-panel messages (continued)
ENWW Tools for troubleshooting 215
