Control panel message Description Recommended action
LOAD TRAY 1 [TYPE] [SIZE]
To use another tray press OK
alternates with
LOAD TRAY 1 [TYPE] [SIZE]
For help press
Tray 1 is empty and other trays are available. Press the OK button to use another tray.
To use Tray 1, load it with the requested
paper.
If the paper is already in the Tray 1, press the
help button
, and then press the OK button
to print.
To use another tray, remove paper from
Tray 1, and then press the OK button to use
another tray.
LOAD TRAY <X> [TYPE] [SIZE]
For help press
The indicated tray is configured for a specific
type and size of paper required by a print job,
but the tray is empty. All other trays are also
empty.
Load the requested paper in the tray.
LOAD TRAY <X> [TYPE] [SIZE]
To use another tray press OK
alternates with
LOAD TRAY <X> [TYPE] [SIZE]
For help press
A job is sent that requires a specific type and
size that is not available in the tray that is
indicated.
Press the OK button to use a type and size
that are available in another tray.
MANUALLY FEED <TYPE> <SIZE> The product is waiting for you to load paper
in Tray 1.
If paper is already in the Tray 1, press the help
button
, and then press the OK button to
print.
To use another tray, remove paper from
Tray 1, and then press the OK button.
MANUALLY FEED <TYPE> <SIZE>
To continue press OK
alternates with
MANUALLY FEED <TYPE> <SIZE>
For help press
The product is waiting for you to load paper
in Tray 1.
Load the requested paper into Tray 1 and
press the OK button.
MANUALLY FEED <TYPE> <SIZE>
To use another tray press OK
alternates with
MANUALLY FEED <TYPE> <SIZE>
For help press
The product is waiting for you to load paper
in Tray 1.
Press the OK button to use a type and size
that are available in another tray.
MANUALLY FEED OUTPUT STACK
Then press OK to print second sides
The first side of a manual duplex job has been
printed and the product is waiting for you to
insert the output stack to complete the
second side.
1. Load the output stack into Tray 1,
maintaining the same orientation with
printed side down.
2. To continue printing, press the OK
button.
MEM TEST FAILURE REPLACE DIMM <X> The product has detected an error with the
DIMM.
Replace the DIMM.
Table 3-7 Control-panel messages (continued)
210 Chapter 3 Solve problems ENWW
