Change jam recovery
This product provides a jam recovery feature that reprints jammed pages. The following options are
available:
●
AUTO — The product attempts to reprint jammed pages when sufficient memory is available. This
is the default setting.
●
OFF — The product does not attempt to reprint jammed pages. Because no memory is used to
store the most recent pages, performance is optimal.
NOTE: When using this option, if the product runs out of paper and the job is being printed on
both sides, some pages can be lost.
●
ON — The product always reprints jammed pages. Additional memory is allocated to store the last
few pages printed. This might cause overall performance to suffer.
Set the jam recovery feature
1. Press the Menu button
.
2. Press the down arrow
button or the up arrow button to navigate to the CONFIGURE
DEVICE menu, and then press the OK button.
3. Press the down arrow
button or the up arrow button to navigate to the SYSTEM SETUP menu,
and then press the OK button.
4. Press the down arrow
button or the up arrow button to navigate to the JAM RECOVERY menu,
and then press the OK button.
5. Press the down arrow or up arrow
/ buttons to highlight the appropriate setting, and then press
the OK button.
6. Press the Menu button
to return to the Ready state.
ENWW Clear jams 241
